Tweed 4

Price £600

Based on the classic Fender Champ 5F1 circuit from the 1950's the Tweed 4 is a 4 watt single ended class A amplifier with an 8 inch alnico speaker. The Tweed 4 is the perfect amplifier for home or recording studio use.

Features

  • 4 watt combo with Jensen P8R alnico speaker.
  • 5Y3 valve rectifier.
  • 12AX7 preamp valve and 6V6 output valve.
  • Single volume control (no tone controls) as per the original design.
  • High and low gain inputs.

Tweed 12

Price £1000

Based on the classic Fender Deluxe 5E3 circuit from the 1950's the Tweed 12 is a 12-14 watt twin channel amplifier with a 12 inch alnico speaker. Despite being only 12-14 watts the Tweed 12 is surprisingly loud and is the ideal amp for small to medium pub and club gigs.

The original Tweed Deluxe is known for it's interactive controls. The volume control on the unused channel affects the tone and most of the range on the volume control is between 1 - 3, turning up above 3 doesn't increase the volume much, it just adds more distortion. We can supply the Tweed 12 wired as per the original or with a modification that removes the interaction and gives a much more linear control of the volume from 1 - 12, many people prefer this.

Features

  • 12 watt combo with Jensen P12Q alnico speaker.
  • 5Y3 valve rectifier.
  • 1 x 12AY7, 1 x 12AX7 preamp valves and 2 x 6V6 output valves.
  • Twin channel design with separate volume controls and single tone control.
  • High and low gain inputs.

Plex 18

Price £950

The Plex 18 is a single channel version of the Marshall 18 watt circuit from the 1960's, the original Marshall was a twin channel amp with normal and tremolo channels, the Plex 18 has no tremolo channel.

Anyone who has used a Marshall 50 watt or 100 watt head will know that they are far too loud to be able to crank up at all but the largest of venues. If you want that cranked Marshall tone at realistic gigging volumes then this is the amp for you.

Features

  • 18 watt head with 4, 8 & 16 ohm speaker outputs.
  • EZ81 valve rectifier.
  • 2 x ECC83 (12AX7) preamp valves and 2 x EL84 output valves.
  • Single channel design with volume and tone control.
  • High and low gain inputs.